Thursday, March 1, 2012

WiFi Wireless IEEE 802.11N/G/B WLAN 54Mbps Network Dongle Adapter USB2.0 Wireless Lan USB Adapter for WiFi Wireless USB Lan Adapter Link for PSP NDS PS3 Wii Laptop Noteook Desktop PC Suport Vista/Windows 7(32bit & 64bit)/Linux

WiFi Wireless IEEE 802.11N/G/B WLAN 54Mbps Network Dongle Adapter USB2.0 Wireless Lan USB Adapter for WiFi Wireless USB Lan Adapter Link for PSP NDS PS3 Wii Laptop Noteook Desktop PC Suport Vista/Windows 7(32bit & 64bit)/Linux

We already done the research and spend a lot of time for you. CLICK HERE to find out where to get the best deal on WiFi Wireless IEEE 802.11N/G/B WLAN 54Mbps Network Dongle Adapter USB2.0 Wireless Lan USB Adapter for WiFi Wireless USB Lan Adapter Link for PSP NDS PS3 Wii Laptop Noteook Desktop PC Suport Vista/Windows 7(32bit & 64bit)/Linux

Product Details

  • Shipping Weight: 5 pounds (View shipping rates and policies)
  • ASIN: B00333AWTA

Price : $7.86
WiFi Wireless IEEE 802.11N/G/B WLAN 54Mbps Network Dongle Adapter USB2.0 Wireless Lan USB Adapter for WiFi Wireless USB Lan Adapter Link for PSP NDS PS3 Wii Laptop Noteook Desktop PC Suport Vista/Windows 7(32bit & 64bit)/Linux

Product Description


1. Support 64/128-bit WEP, complies with 128 bit WPA standard(TKIP/AES), supports MIC, IV Expansion, Shared Key Authentication, IEEE 802.1X 2. supports 150/54/48/36/24/18/12/9/6/11/5.5/2/1 Mbps wireless LAN data transfer rates 3. Quick Secure Setup, complies with WPS for worry free wireless security 4. Simple Configuration and monitoring 5. Supports Roaming technology, guaranteeing efficient wireless connections. 6. Supports Windows ME/2000/XP/Vista/Windows 7/Mac/Linux 7. With internal Antenna

This Best Selling WiFi Wireless IEEE 802.11N/G/B WLAN 54Mbps Network Dongle Adapter USB2.0 Wireless Lan USB Adapter for WiFi Wireless USB Lan Adapter Link for PSP NDS PS3 Wii Laptop Noteook Desktop PC Suport Vista/Windows 7(32bit & 64bit)/Linux tends to SELL OUT VERY FAST!!

Technical Details

  • Specifications:IEEE 802.11N: 20MHz up to 72.22Mbps, 40MHz up to 150Mbps
  • Ralink Chipset
  • System Requirements: PC - compatible computer, CPU speed of 200MHz or above;Memory: 64MB or above, 12
  • How to install driver and utility: Insert the software CD to your CD-ROM, then it will auto run imme
  • Bulk Package

Customer Reviews


So far, the product is working properly for me, and the product arrived sooner than I expected. I needed this product to provide wifi to my nintendo ds, because I did not want to take the security off my router, or switch to WEP. Here is what I did to set mine up, not sure if it will work for everyone, some of these WLAN products and drivers are strange.
1. Plugged the device into computer, and I ignored the "Found new hardware" thing that popped up from windows.
2. Inserted disc that came with product, and opened the files up from the D drive. I thin went into the wifi folder that was on the disc, and the the setup in admin mode. (I'm on vista 32 bit btw)
4. from there I just allowed the setup to run, and restarted my computer to finalize installation.
5. I opened the program and clicked the Mode tab at the top, and switched it to Access Point.
6. I think clicked the ICS tab, and applied it to my computers source of internet. (my ethernet cord.) From there I was able to successfully make a connection with the DS Lite.
I can't figure out how to change the SSID name, it takes the name of whatever you have your computer named as.

First off, you should actually ignore people who gave this item bad reviews if it was about the installation. The installation is actually very simple, but the directions are horrible that come with the device. The most important thing is to NOT PLUG IN THE ADAPTER BEFORE INSTALLING THE DRIVER. Ignore the disc that comes with the USB Adapter, it is a small disc and many computers can't read those types of discs anymore. Instead just download the software from here: http ://goo .gl/ 7suWp (without the spaces in between)
and if that file goes down or unavailable in the future just google "RTL8192CU_AutoInstallPackage" with quotes. You can add ".zip" to the end of it too if you want to find a quick direct download.
I want to make it clear that I bought this product for around $5, and honestly this is the best deal I've ever had on an item of this quality. Yes, the directions it comes with are misleading and problematic. Most users will actually plug in the USB Adapter without reading the directions first which state that you should NOT plug it in because your computer will begin installing improper software if it does. Yes, this is a bad design flaw, but all you really need to install this product is 1 driver. Here is the driver: http ://goo .gl/ 7suWp (without the spaces in between) or just google "RTL8192CU_AutoInstallPackage" with quotes.
Once you 'unzip' the file, just install the driver, then plug in the adapter. That is it! Now to actually get it to work you may have to let it load up and start and install it's features and whatnot. I left it plugged in for a good while. Then I unplugged it (it is important to unplug it each time you are preparing to turn off your computer or put it in sleep mode because you will just have to pull it out and put it back in each time you boot back up) Then the next time you use it it should be picking up several wireless networks located near you. Please note: sometimes it needs to be taken out of the usb port and put back in if it isn't responding, but I have a very old and bad laptop so it may just be my computer being lazy.
In order to use it as a wi-fi hotspot (emits a wi-fi radius to allow your ps3/wii/ds/3ds/etc connect to it wirelessly to use internet) you need to first connect to your either wired network to your computer or your wireless network located nearby. Then you need to go to the top bar where it says [Refresh] and other options and choose [Mode (M)]. Then from that click [AP Mode]. AP Mode means Access Point Mode which emits a wi-fi hotspot for you from your laptop. If the green light on the USB Adapter hasn't been flickering already it should be now.
AGAIN: IT IS IMPORTANT TO NOTE THAT YOU MAY HAVE TO TRY THIS A FEW TIMES (only the steps after installing the driver) BECAUSE THE DEVICE CAN BE A LITTLE SLOW IN CONNECTING SOMETIMES BUT ONCE IT ESTABLISHES ITS CONNECTION IT IS VERY RELIABLE. I have not encountered any problems once I got the device to work. Each time you plug it in you may have to wait a few seconds for it to connect to your computer, then the software, then your wifi/wired network, then establish a hot spot. Sometimes when you connect to make an AP hotspot (AP Mode) a blue bar will appear showing it's progress in creating the hotspot so give it some time. For me the amount of time it takes varies but it is always reliable.
TOO LONG DIDN'T READ:
Step 1: Download RTL8192CU_AutoInstallPackage.zip
Step 2: Install the driver from the file (RTL8192CU Driver AutoInstall)
Step 3: Restart computer
Step 4: Plug in Wireless USP Adapter
Step 5: Allow Adapter to connect to software and wait.
Step 6: Unplug adapter
Step 7: Restart computer (all restarting is just a precautionary measure, but it is not necessary unless it asks you specifically on your computer)
Step 8: Make sure the REALTEK USB WIRELESS LAN UTILITY software is on (at the bottom right of the screen where your icons are located you should see a blue crab looking thing with red lines or circle somewhere on it or something close to that)
Step 9: Connect the software to your current internet network (You have to look around in the software and it will show internet networks located near you and you have to choose yours)
Step 10: Click at the top [Mode (M)] and select AP Mode (this will change the software mode into a wifi emitting mode)
Step 11: Configure any settings you like such as passwords and such. If you had a password on your previous internet network it will more likely keep that password for your new wifi that is being emitted, but don't quote me on that.
Step 12: Get our your PS3/Wii/DS/PSP/etc whatever you are using to connect to the wifi and have them choose the new wifi network (It should be named the title of what your computer is named ie: "[your name/user name] - PC_AP"
Everything should work perfectly and the speed at which it all connects is very impressive for a device with such bad directions. I hope this helped, I wrote this in a drowsy state but it is very simple to install.
SUPER SUPER SIMPLE DIRECTIONS:
1: download and install RTL8192CU_AutoInstallPackage.zip
2: plug in USB ADAPTER
3: connect software to current network
4: turn to AP Mode
5: connect other devices to new wifi network
Good luck.
If you can't figure out your password when trying to connect with your game device or something just try all the passwords you know that you use, you'd be surprised how many times I've just used the wrong passwords and gotten frustrated. After all your game devices are connected they won't ask for a password again even if you unplug the adapter and plug it back in a year later, just ask your game systems to remember the password, or I believe the 3ds does by default but again don't quote me on that.
Overall I say this is worth the buy, it is reliable in the long run, and is great for under $10. You won't be disappointed.

 

WiFi Wireless IEEE 802.11N/G/B WLAN 54Mbps Network Dongle Adapter USB2.0 Wireless Lan USB Adapter for WiFi Wireless USB Lan Adapter Link for PSP NDS PS3 Wii Laptop Noteook Desktop PC Suport Vista/Windows 7(32bit & 64bit)/Linux

 

0 comments:

Post a Comment

Blog Archive

Powered by Blogger.